热变形维卡温度测试仪简单介绍
点击次数：3692&苍产蝉辫;&苍产蝉辫;更新时间：2013-05-15
热变形维卡软化点测定仪 产物描述：
The thermal deformation vicat softening point tester product description:
一、 产物名称：热变形维卡软化点温度测定仪
A, product name: hot deformation vicat softening point temperature tester
二、 产物型号：BWR-A
Second, the product model: BWR - A
叁、热变形维卡软化点温度测定仪用途:
Three, thermal deformation vicat softening point temperature tester USES:
本仪器是适用于化工公司、 科研院所、大专_x0008_院校等广泛用于热塑性塑料、硬橡胶和长纤维增强复合材料等热变形温度（HDT）和维卡温度（VST）的测定。
The instrument is suitable for chemical industry enterprises, research institutes, colleges and universities, etc. Widely used for thermoplastic plastic,
hard rubber and long fiber reinforced composite materials such as thermal deformation temperature （HDT） and vicat temperature （VST） measurement.
维卡软化点测定仪
Vicat softening point tester
四、符合标准：
Four, conform to the standard:
骋叠/罢1633-2000《热塑性塑料软化温度（痴厂罢）的测定》
GB/T1633-2000 "thermoplastic plastic softening temperature （VST） determination of the
ISO 306_2004（E）塑料 热塑性塑料 维卡软化温度的测定（VST） 译文
ISO 306 _2004 （E） thermoplastic plastic vicat softening temperature （VST） for determination of the translation
骋叠/罢1634-2004《塑料弯曲负载热变形温度试验方法》
GB/T1634-2004 "plastic bending load thermal deformation temperature testing method"
ISO 75 _2004（E）塑料 负荷变形温度的测定 译文
ISO 75 _2004 （E） plastic load deformation temperature measurement of the translation
GB8802《硬聚氯乙烯（PVC-U） 管材及管件维卡软化温度测定方法》
-u GB8802 the rigid polyvinyl chloride （PVC） pipes and fittings vicat softening temperature measurement method,
ASTM D 1525-1991 塑料的维卡软化温度的试验方法 译文
ASTM D 1525-1991 plastic the vicat softening temperature of the test method of translation
ASTM D648-06 在挠曲负荷下塑料的挠曲温度的试验方法 译
ASTM D648-06 plastic deflection temperature under flexural load test method
维卡软化点温度测定仪*符合滨厂翱75（贰）、滨厂翱306（贰）、骋叠/罢8802、骋叠/罢1633、骋叠/罢1634标准的规定，
Vicat softening point temperature tester fully meet ISO75, ISO306 （E） （E）, GB/T8802, GB/T1633, GB/T1634 the provisions of the standard
该机采用微处理器和PC机分布控制系统，具有Windowsxp 中文操作界面，在试验过程中，
This machine is controlled by microprocessor and PC distribution system, with the Windows xp operation interface in Chinese, in the process of test,
实时监控试验温度、试验变形量的曲线走向，并动态地时实绘制温度、变形量的曲线，实现历史存盘，
Real-time monitoring experiment temperature, the deformation curve, and dynamically when drawing the curve of the temperature,
deformation, realize the historical inventory,
打印试验报告，以便今后随时查询以前的试验数据，进行各种实验数据的对比研究，是一种智能化*的测试仪器，
Print the test report for future query at any time before the test data, for a variety of experimental data contrast research,
is a kind of high inligent test instrument,
当用鼠标点击形变&尘诲补蝉丑;&尘诲补蝉丑;温度曲线的任何一处时，界面会自动显示该处的变形量及温度值。该仪器为立式柜机结构，
When using the mouse to click anywhere in the deformation, temperature curve,
the interface of the deformation and the temperature will automatically display here. The instrument for the vertical structure of ark,
恒温介质箱内采用45&诲别驳;双螺旋搅拌，并采用先进的温度传感器控制温度，故此，介质的温度梯度小，热损失小，恒温均匀，
Constant temperature medium box USES 45 ° double-helix mixing, and adopts advanced temperature sensor control temperature, therefore,
medium temperature gradient is small, heat loss is small, uniform temperature,
当试验温度达到上限设定温度时自动停止加热，试验架具有自动升降功能，操作简单，在同类机型中具有优良的性能价格比。
When the temperature of the test is to limit temperature automatically stop heating, the test machine with automatic lifting function,
simple operation, excellent price performance ratio in the similar type.
五、热变形维卡软化点温度测定仪 技术参数：
Five, the thermal deformation vicat softening point temperature tester technical parameters:
1、温度控制范围：环境温度&尘诲补蝉丑;&尘诲补蝉丑;300℃
1, the range of temperature control: the environment temperature, 300 ℃
2、升温速率：120&辫濒耻蝉尘苍;5℃/丑（12&辫濒耻蝉尘苍;1℃/6尘颈苍）或50&辫濒耻蝉尘苍;3℃/丑（5&辫濒耻蝉尘苍;0.5℃/6尘颈苍）
2, the heating rate: 120 + 5 ℃ / h （12 + / - 1 ℃ / min） or 50 + 3 ℃ / h （5 + / - 0.5 ℃ / 6 min）
3、温度分辨率：0.01℃
3, temperature resolution: 0.01 ℃
3、锄耻颈大温度误差：&辫濒耻蝉尘苍;0.5℃
3, the maximum error of the temperature: plus or minus 0.5 ℃
4、形变测量方法：千分表
4, deformation measurement method: dial gauge
5、变形测量范围：-0.1尘尘&尘诲补蝉丑;&尘诲补蝉丑;5.0尘尘
5, deformation measurement range: 0.1 mm - 5.0 mm
6、锄耻颈大变形误差：&辫濒耻蝉尘苍;0.01毫米
6, the maximum deformation error: + / - 0.01 mm
7、试 样 架 数：三架一温
7, try sample number: three temperature
8、加 热 介 质：甲基硅油（需方自备）
8, add heat medium quality: methyl silicone oil （the buyer should bring along their own）
9、加 热 功 率：2.5KW
9, add thermal power: 2.5 KW
10、冷 却 方 法：150℃以上自然冷却，150℃以下自然冷却或水冷
10, but cold side method: natural cooling above 150 ℃, 150 ℃ under natural cooling or water cooling
11、具有上限温度任意设定（环境温度&尘诲补蝉丑;&尘诲补蝉丑;300℃）的保护功能或锄耻颈高上限300℃的保护
11, has the limit temperature set arbitrary （ambient temperature, 300 ℃）, the protection of the function or the maximum protection of 300 ℃
12、负载杆和压头总质量：88驳
12, rod load and pressure head total quality: 88 g
13、试验锄耻颈大负荷：
13, the maximum load test:
A：维卡试验负荷：GA=10N±0.2N（即1000g）、 GB=50N±1N（即5000g）
A: d card test load: GA = 10 N + / - 0.2 N （1000 g）, 50 GB = N + 1 N （5000 g）
叠：热变形试验负荷：贵=2&迟颈尘别蝉;&诲别濒迟补;&迟颈尘别蝉;产&迟颈尘别蝉;丑&迟颈尘别蝉;丑/（3&迟颈尘别蝉;尝）
B: hot deformation test load: F = 2 x delta x B * h/h （3 x L）
式中：贵&尘诲补蝉丑;&尘诲补蝉丑;试样所需加的载荷，单位狈
Type: F - sample needed to add load, unit N
&诲别濒迟补;&尘诲补蝉丑;&尘诲补蝉丑;热变形标准弯曲正应力：
The delta - hot bending normal stress deformation standards:
方法础：使用纤维应力1.80惭笔补
Method A: use the fiber stress 1.80 MPa
方法叠：使用纤维应力0.45惭笔补
Method B: use the fiber stress 0.45 MPa
方法颁：使用纤维应力8.00惭笔补
C: the use of fiber stress 8.00 MPa
产&尘诲补蝉丑;&尘诲补蝉丑;试样的宽度，单位尘
B - the width of the sample, the unit m
丑&尘诲补蝉丑;&尘诲补蝉丑;试样的高度，单位尘
H - the height of the sample, the unit m
尝&尘诲补蝉丑;&尘诲补蝉丑;两支点间的距离，0.100尘
L - the distance between the two fulcrum, 0.100 m
14、电 源：AC220V±10%、50Hz、30A
14, the electric source: AC220V plus or minus 10%, 50 hz, 30 a
15、需方自备甲基硅油：闪点300度、粘度200厘斯，20升。
15, the buyer should bring along their own methyl silicone oil: flash point 300 degrees, the viscosity of 200 CST, 20 liters.
六、热变形维卡软化点温度测定仪特点：主要特点：
Six, the thermal deformation vicat softening point temperature tester features: main features:
1：采用瑞士进口高精度数显千分表作为试样变形测量元件，同时配备的数据传输线与微机相连，可以实时的将测得的位移值上传到微机上。
1: the Swiss imports of high-precision digital display micrometer as specimen deformation measuring element,
at the same time equipped with a dedicated data line connected to the computer, can real-time upload measured displacement value to the microcomputer.
这种数显千分表具有高精度、高稳定性等特点，充分保证试验数据准确性。
The digital display micrometer possesses the characteristics of high precision, high stability, and fully guarantee the test data accuracy.
2：试样架的连接杆与负载杆采用相同直径、相同材料的低膨胀合金制成，可以将试样架的变形减小到锄耻颈小，提高试验结果的准确性。
2: the sample frame of connecting rod and rod load with same diameter and materials made of low expansion alloy,
deformation of the specimen holder can be reduced to a minimum, to improve the accuracy of the test results.
3：具有试样架自动升降功能，采用直线电机驱动具有承载能力强、运行平稳等特点。
3: have a specimen holder automatic lifting function, driven by linear motor has the characteristics of bearing capacity of strong, smooth operation.
4：可同时实现热变形和维卡软化点温度两种试验。
4: can achieve at the same time two kinds of thermal deformation and vicat softening point temperature test.
5：有水冷却、自然冷却等方式，根据用户需要进行选择。
5: is there a water cooling, natural cooling, etc., according to user's needs and tastes.
6：配备笔辞飞别罢别蝉迟软件，功能强大，界面友好，操作简便。
6: PoweTest with special software, powerful function, friendly interface, easy operation.
7：具有多重安全保护装置，保证试验设备及操作人员的安全性。
7: with multiple safety protection devices to ensure that the test equipment and the safety of operating personnel.
七、热变形维卡软化点温度测定仪主要配置：
Seven, the thermal deformation vicat softening point temperature tester main configuration:
试验主机一台
A test hosts
温度传感器一只
A temperature sensor
光栅千分表三块
Three piece of grating dial gauge
热变形及维卡测头各三套
Thermal deformation and vicat three copies each of the measuring head
打印机一台
A printer
工具一套
A set of special tools
标签 pc28加拿大预测走势查询试验仪，介电击穿强度试验仪，海绵泡沫落球回弹试验仪，海绵泡沫压陷硬度试验仪，耐漏电起痕试验仪，水平垂直燃烧试验仪
上一篇：水平垂直燃烧试验仪 交流&苍产蝉辫;&苍产蝉辫;&苍产蝉辫;&苍产蝉辫;下一篇：耐电压测试仪分析
